The MicroPython Lego Bot

In the quest for getting my kids interested in coding, I’ve decided to make them a message controlled bot car with Lego bricks and an ESP8266 board. The idea is to have an environment where we can jointly program a sequence of actions that can be sent via WiFi to the bot for execution. With this setup we can make challenges like creating the optimal sequence for navigating through a maze or simply try out crazy movements & mayhem just for the fun of it. Hopefully, having an assignment were you need to connect an abstraction like a sequence of symbols with a physical object will ignite a spark of interest for electronics and the basics of programming.

This post describes the first part of this project. I will use Lego bricks and some servos to build a car bot and mount an ESP8266 board loaded with MicroPython. To begin with, the bot will be controlled via WiFi through MicroPython’s WebREPL.

Continue reading →

Advertisements

A sensor monitor with OLED in MicroPython

I have different sensor nodes at home that publish measurements at regular intervals to a Raspberry Pi. The data is stored on the RPi and in a cloud service and can be viewed with various applications. As my most common use case is to view the latest value of a particular sensor, I would like to have a mounted low-powered display in the kitchen to show the latest values from my sensors.

In this post I will show how I have used an Adafruit Feather Huzzah and a FeatherWing OLED that monitors the latest messages from my sensors. To get out of my normal comfort zone (Arduino IDE with C/C++), I will use MicroPython for the implementation.

Continue reading →

MicroPython and ESP8266

During the past 6 months  I have grown into a big fan of the Python programming language. I have also found a new passion in tinkering with the versatile and inexpensive ESP8266 microcontroller boards. For the embedded programming I usually stick with Arduino IDE and C/C++, but as there now is a Python implementation for ESP8266 available, I have to try it out and see if I can combine my two latest passions. In this post I will describe my first experiments with MicroPython on an ESP8266 board (an Adafruit Feather Huzzah).

Continue reading →